The exit wand is an electro-magnetic sensor that detects metal mass in motion providing a 12 foot radius of detection. Used as exit device.

Opens a closing gate and holds open an open gate, if maintained, pauses Timer-to-Close at Open limit.

All loops are cut into the driveway.

This input is used for external shadow loop detector when loop is positioned under the swing gate.

• Holds open gate at open limit.
• Only active when the gate is at the OPEN limit, disregarded at all other times.
• Pause Timer-to-Close at OPEN limit.

This input is used for photoelectric sensors and external interrupt loop detector when loop is on the outside of the gate.

• Holds open gate at open point
• Stops and reverses a closing gate to open limit
• Pauses Timer-to-Close at OPEN limit, activates quick close and anti-tailgate gestures when enabled on the expansion board.